Landlord Gas Safety Responsibilities: A Practical Guide for Landlords

Yellow gas supply pipework with isolation valves fitted on a brick wall

If you let a property with gas appliances, the Gas Safety (Installation and Use) Regulations 1998 give you specific legal duties to keep your tenants safe. They apply whether you have one buy-to-let flat or a portfolio, and whether you manage it yourself or through a letting agent.

This guide sets out what the law requires in plain English, based on guidance from the Health and Safety Executive (HSE), which enforces the regulations. It covers Great Britain for gas safety duties, and England for carbon monoxide alarm rules.

Gas engineer completing a landlord gas safety record beside a wall-mounted boiler

The three core duties

HSE describes a landlord’s gas safety responsibilities under three headings: maintenance, annual safety checks and record keeping.

1. Maintain gas pipework, appliances and flues

Gas pipework, appliances and flues that you provide for tenants must be kept in a safe condition. Appliances should be serviced in line with the manufacturer’s instructions. If those instructions are not available, an annual service is the usual recommendation. Any maintenance or repair work on gas fittings must be carried out by a Gas Safe registered engineer.

2. Arrange an annual gas safety check

Every gas appliance and flue you provide must have a safety check at intervals of no more than 12 months, carried out by a Gas Safe registered engineer. The check confirms that appliances are safe to use, that they are burning correctly, that flues are working and that there is adequate ventilation.

Since the 2018 amendment to the regulations, you can have the check done up to two months early, from 10 months after the last one, and keep the original expiry date. This is sometimes called the MOT-style approach. It means you can book around tenants without losing time off your annual cycle.

A routine boiler service is not automatically the same as a gas safety check. HSE advises landlords not to assume that a service inspection meets the safety check requirement. Both can often be done in a single visit, but the safety check must be carried out and recorded properly. Our guide to how often a boiler should be serviced explains the difference in more detail.

3. Keep the record and give tenants a copy

After the check, the engineer produces a written record, widely known as a landlord gas safety certificate or CP12. You must:

  • Give existing tenants a copy within 28 days of the check being completed.
  • Give new tenants a copy before they move in.
  • Keep the record for at least two years. If you use the MOT-style option to check early, HSE guidance says to keep records until two further checks have been completed.
  • For occupancies of less than 28 days, such as some holiday lets, you can display a copy in a prominent place in the property instead.

Records can be kept and sent electronically, as long as tenants can access them.

Landlord gas safety record form being completed during an inspection

What the gas safety record must include

HSE sets out the minimum information the record must contain:

  • A description and the location of each appliance or flue checked
  • The name, Gas Safe registration number and signature of the engineer who carried out the check
  • The date of the check
  • The address of the property
  • The name and address of the landlord or their agent
  • Any defect identified and any remedial action taken
  • Confirmation of the results of the operational safety checks

If the engineer finds an appliance unsafe, it will be recorded on the record and the engineer may need to turn it off or disconnect it until it is repaired. Make sure remedial work is completed promptly and keep evidence that it was done.

What is and is not covered

  • Appliances you provide, such as the boiler, a gas hob or a gas fire, are covered by both the maintenance duty and the annual check.
  • Appliances the tenant owns are not your responsibility, but the gas pipework that serves them still is.
  • Flues: HSE recommends including all flues and chimneys connected to gas appliances in the check, even where they serve appliances the tenant owns.

If tenants will not give you access

Tenants should allow access for safety checks and maintenance, but it does not always happen. If you cannot get in, keep a clear record of every attempt: letters, emails, texts and the dates of visits offered. HSE inspectors look for evidence of repeated, reasonable attempts to complete the check.

Using a letting agent

You can ask an agent to arrange gas safety checks, but your management contract should state clearly who is responsible for maintenance, the annual check and keeping records. If the contract does not make this clear, the duties may still rest with you.

Carbon monoxide alarms (England)

Separate rules cover alarms. Since 1 October 2022, the Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022 require landlords in England to:

  • Fit a carbon monoxide alarm in any room used as living accommodation that contains a fixed combustion appliance, such as a gas boiler or gas fire. Gas cookers are excluded.
  • Fit at least one smoke alarm on every storey used as living accommodation.
  • Check that alarms are working on the first day of a new tenancy.
  • Repair or replace an alarm as soon as reasonably practicable after a tenant reports it is faulty.

Wales has its own requirements under the Renting Homes (Wales) Act 2016, so check the Welsh rules if you let property there.

Landlord gas safety checklist

  • Annual gas safety check booked, no more than 12 months after the last one
  • Engineer’s Gas Safe ID checked, including the categories of work on the back of the card
  • Copy of the record given to tenants within 28 days, or before a new tenancy starts
  • Records stored for at least two years
  • Any defects fixed and the repair documented
  • Boiler and other appliances serviced to the manufacturer’s instructions
  • Carbon monoxide and smoke alarms fitted and tested on day one of each tenancy
  • Tenants told where to turn off the gas and to call 0800 111 999 if they smell gas

Landlord gas safety checks in Milton Keynes

VMV Plumbing & Heating carries out landlord gas safety checks in Milton Keynes for private landlords and letting agents, with the Gas Safety Record issued after a satisfactory inspection. We cover Milton Keynes, Bletchley, Newport Pagnell, Wolverton, Leighton Buzzard and the surrounding towns. We can also combine the check with boiler servicing, and homeowners who simply want peace of mind can book a gas safety inspection. Our engineers are Gas Safe registered (No. 594654).

Gas safety check due? Call 07902 743538 or request a quote for one property or several.

Frequently asked questions

Is a CP12 the same as a landlord gas safety certificate?

Yes. CP12 is the name of the form used under the old CORGI scheme, and it stuck. The regulations themselves refer to a record of the gas safety check, which HSE now calls the landlord gas safety record.

How long is a landlord gas safety certificate valid for?

The check must be repeated at intervals of no more than 12 months. You can carry it out from 10 months after the previous check and keep the original anniversary date.

What happens if I do not have a valid gas safety record?

Failing to meet your gas safety duties is a criminal offence, and HSE can take enforcement action. Tenants who do not have a current record can report it to HSE.

Do I need a gas safety check if the property is empty?

The duty applies to appliances provided for tenants’ use. A check must be in place before a new tenant moves in, because they need a copy of the record before the tenancy starts.

This guide is general information, not legal advice. For the full detail, see HSE’s guidance for landlords below.

Sources

Milton Keynes and surrounding towns

Planning a new boiler or heating upgrade?

From boiler and radiator installations to annual servicing, our Gas Safe engineers look at your home, explain the options and agree the work with you before anything starts.

Get a free quote Call 07902 743538