Home>FAQs
The questions customers ask us most before a new boiler, gas appliance or heating installation, answered by a Gas Safe registered engineer.
A like for like swap, where the new boiler goes in the same place as the old one, is usually finished in a day. Changing the type of boiler or moving it to a new position normally takes two to three days, because the pipework, flue and controls all change. We confirm the timescale in your written quote after the survey.
It depends on how many radiators and bathrooms you have, how much hot water you use at once and the flow rate of your mains water. As a rough guide, a one or two bedroom home with one bathroom often suits a 24 to 27 kW combi, and a three or four bedroom home a 28 to 34 kW combi. Homes with two or more bathrooms are often better served by a system boiler and a hot water cylinder. We measure all of this at the survey so the boiler is sized for your home, not guessed.
A combi heats water on demand and needs no cylinder, which suits smaller homes with one bathroom. A system boiler works with a hot water cylinder and copes better when several taps or showers run together. A regular boiler suits older systems with tanks in the loft. Our guide to combi vs system boilers explains the differences in more detail.
In most homes, yes. The new position needs a route for the flue to an outside wall or through the roof, somewhere for the condensate pipe to drain, and a gas supply of the right size. Common moves are from the kitchen to a utility room, an airing cupboard or the loft. We check what is possible at the survey and include the extra pipework in the quote.
Often, yes. Many older boilers were fed by a 15 mm gas pipe, while a modern combi usually needs 22 mm or larger to get enough gas at full output. We test the working pressure and calculate the pipe size during the survey. If an upgrade is needed it is included in your quote. See our gas pipe installation service.
We complete the manufacturer's Benchmark commissioning checklist, register the warranty and notify the installation through Gas Safe Register. You then receive a Building Regulations Compliance Certificate in the post. Keep these documents safe, as you will need them if you sell the property or make a warranty claim.
It depends on the type and output of the boiler, the flue, and how much pipework has to change, so we do not publish set prices. We survey your home free of charge and give you a clear written quote before any work starts. Call Viktor on 07902 743538 to arrange a visit.
Yes. By law, gas appliances must be fitted by an engineer on the Gas Safe Register who is qualified for that type of appliance. This applies to gas hobs, cookers, fires and boilers. VMV Plumbing & Heating is Gas Safe registered, number 594654. See our gas hob installation and gas cooker installation services.
Ask to see their Gas Safe ID card. The back of the card lists the types of gas work they are qualified to do. You can also check the business or the engineer on the Gas Safe Register website or by calling the Register on 0800 408 5500. Our registration number is 594654.
It depends on your chimney or flue. A conventional flue fire needs a working chimney or flue, a balanced flue fire vents through an outside wall and needs no chimney, and a flueless fire needs neither but has minimum room size and ventilation rules. Read our guide to the types of gas fire or see our gas fire installation service.
Every 12 months. Each gas appliance and flue in a rented property must be checked by a Gas Safe registered engineer. Existing tenants must get a copy of the record within 28 days of the check, new tenants before they move in, and landlords must keep records for at least two years. See our landlord gas safety certificate service.
Once a year. An annual service keeps the boiler running safely and efficiently, and most manufacturers require it to keep the warranty valid. See our boiler servicing page for what the service includes.
A vented cylinder is fed by a cold water tank in the loft, so the pressure at your taps depends on how high the tank sits. An unvented cylinder is fed directly from the mains, which gives stronger pressure at showers and taps and frees up the loft space. We install both. See our vented and unvented cylinder installation service.
Unvented cylinders store hot water under pressure, so they must be installed by an engineer who holds the G3 unvented hot water qualification, and the installation must be notified under Building Regulations. Our engineer is G3 certified.
The system should always be cleaned before a new boiler is connected, because sludge from old radiators can damage the new heat exchanger and may affect the warranty. A system with a lot of sludge needs a power flush, while a cleaner system may only need a chemical flush. We then add inhibitor and usually fit a magnetic filter to protect the new boiler.
We are based in Bletchley and cover Milton Keynes and towns within about 20 miles, including Fenny Stratford, Newton Longville, Stony Stratford, Newport Pagnell, Woburn Sands, Leighton Buzzard, Buckingham, Bedford, Aylesbury and Luton.
Call or WhatsApp Viktor on 07902 743538, or send the form on our contact page. We arrange a visit to look at the job, then send a clear written quote. There is no charge for the survey.
Speak to Viktor directly. He will tell you what the job involves and arrange a free survey.